How to install printed blinds yourself?

blinds

Printed blinds The soft soakers are a fantastic way to put a personal stamp and style to your home decor. Besides, they are also very useful in giving privacy and the ability to control the light, and they can be a unique design element. You can have fun in doing printed blinds on your own, which not only saves you money but also lets you design your window treatments exactly as you want. Follow these steps for a successful DIY installation:Follow these steps for a successful DIY installation:

Gather Your Supplies: You have to first, be sure that you have all the tools and the materials you need before you start. You will mostly be required to have a measuring tape, a pencil, a screwdriver, a level, a drill, screws, brackets and of course, the blinds that are printed.

Measure Your Windows: Precise measurements are the key to a well-fitted apparel. Calculate the distance between the top and the bottom of the window recess or the area where you want to install the blinds. If you’re installing the blinds outside the window frame, take the width and height of the window frame instead of the whole window.

Select the Mounting Style: Decide whether you want to mount the blinds in the window frame or outside the window frame. In case of inside mounting, the appearance of the window is kept cleaner, whereas outside mounting can make the window look bigger and thus allow to control the light better.

Trim the Blinds (If Necessary): If your blinds are wider than the window opening, you might have to cut them to the proper size. The usual printed blinds can be easily shortened with a sharp pair of scissors or a utility knife. Even though you have to be careful, you should still follow the company’s instructions for cutting.

Install Mounting Brackets: On the basis of your measurements, you will have to mark the location of the mounting brackets on the window frame or wall. Set them in a straight line using a level. After, you would drill pilot holes for the screws and firmly attach the brackets on their spots.

Attach the Blinds to the Brackets: Turn the headrail of the blinds into the mounting brackets until they snap into their position. In case the blinds are not yet level, you should adjust them before tightening the screws to make them secure.

Test the Operation: After the blinds are properly fixed, you should check the opening and closing mechanism to see if it operates smoothly. Try to make any changes to the tension or alignment of the blinds if needed.

Secure Cords or Chains (If Applicable): If your blinds have cords or chains for operation, you should install safety devices to prevent them from being hazard-free for children or pets. The cord hooks or the tension devices can be the reason of the cutting of the accidents and the tidiness of the cords.

Enjoy Your New Blinds: After the installation has been done, stand back and look at what you have achieved! Your printed blinds are ready to be installed and will be able to improve the aesthetic and the practicality of your room.

Maintenance Tips: To keep your printed blinds looking their best, regularly dust or vacuum them to remove dirt and debris. For stubborn stains, spot clean with a mild detergent and water, taking care not to saturate the fabric. Avoid harsh chemicals or abrasive cleaners, as they may damage the print or fabric.

By following these simple steps, you can successfully install printed blinds yourself and transform your windows into stunning focal points in your home. Enjoy the added privacy, style, and functionality that custom blinds provide, all while saving money and adding a personal touch to your decor.

Leave a Reply

Your email address will not be published. Required fields are marked *